الوصف الوظيفي:
أحدث معلومات الوظائف من FJ Group لمنصب Quality Control QC Engineer - LV Panel. If the Quality Control QC Engineer - LV Panel الشاغرة في Riyadh تتوافق مع مؤهلاتك، يرجى تقديم أحدث طلب أو سيرة ذاتية مباشرة من خلال بوابة وظائف Jobkos المحدثة.
يرجى ملاحظة أن التقديم على وظيفة قد لا يكون سهلاً دائماً، حيث يجب على المرشحين الجدد استيفاء مؤهلات ومتطلبات معينة تحددها الشركة. نأمل أن تكون الفرصة المهنية في FJ Group لمنصب Quality Control QC Engineer - LV Panel أدناه تتوافق مع مؤهلاتك.
الشركة - Tawreed Integrated Industries LLC
Job Summary:
The Quality Control (QC) Engineer is responsible for ensuring that all manufactured low-voltage (LV) panelboards meet established quality standards, project specifications, and relevant industry regulations (IEC, SASO). This role involves implementing and maintaining quality control processes, conducting inspections at various production stages, identifying and resolving quality issues, and driving continuous improvement, with a particular focus on systems and standards aligned with ABB's manufacturing practices and product lines.
Key Responsibilities:
- Quality Planning & Documentation:
- Develop, implement, and maintain Quality Control Plans (QCPs), Inspection and Test Plans (ITPs), checklists, and standard operating procedures (SOPs) for LV panelboard manufacturing, ensuring alignment with ABB quality protocols where applicable.
- Review project specifications, technical drawings (including those based on ABB designs), and Bill of Materials (BOMs) to establish quality criteria.
- Inspection & Testing:
- Conduct thorough incoming material inspections, particularly for critical components like ABB circuit breakers, protection relays, and other specified parts, verifying compliance with purchase order specifications and authenticity.
- Perform in-process inspections during panelboard assembly, busbar fabrication, wiring, and component installation, ensuring adherence to design drawings, workmanship standards (aligned with ABB practices), and safety protocols.
- Conduct final quality control inspections and witness routine factory tests (e.g., visual, dimensional, mechanical, continuity, insulation resistance, functional tests, high voltage tests if required) on completed LV panelboards according to IEC 61439, SASO standards, and specific ABB testing procedures.
- Conducts & trouble shoots all the SAT procedures with the client.
- Non-Conformance Management:
- Identify, document, segregate, and report any defects, deviations, or non-conformances using established procedures.
- Lead or participate in root cause analysis (RCA) for quality issues and collaborate with Production, Engineering, and Procurement teams to implement effective corrective and preventive actions (CAPA).
- Calibration & Equipment Management:
- Ensure all inspection, measuring, and test equipment (IM&TE) used for QC activities are properly calibrated, maintained, and in good working order.
- Reporting & Analysis:
- Prepare accurate and timely QC reports, including inspection records, test results, non-conformance reports (NCRs), and quality metrics.
- Analyze quality data to identify trends, areas for improvement, and report findings to management.
- Making all the SAT procedures along with Method statements, ITP, operation & maintenance Manual is a must.
- Actively contribute to continuous improvement initiatives aimed at enhancing product quality, reducing defects, and optimizing QC processes, drawing on best practices from ABB or similar high-standard environments.
- Provide training and guidance to production personnel on quality standards, inspection criteria, and workmanship requirements specific to LV panelboard assembly (including ABB-specific practices).
- Supplier Quality (Support):
- May assist in evaluating supplier quality and providing feedback based on incoming material inspections.
- Audits & Compliance:
- Participate in internal and external quality audits (e.g., ISO 9001, client audits, potential ABB system audits).
- Ensure all QC activities comply with the الشركة's Quality Management System (QMS) and relevant regulatory requirements.
Required Qualifications & Experience:
- Education: Bachelor's degree in Electrical Engineering is strongly preferred.
- Experience:
- 5-8 years of dedicated experience as a Quality Control (QC) Engineer.
- Essential: Proven experience in the quality control of low-voltage panelboard/switchgear manufacturing, including assembly, wiring, and testing.
- Highly Preferred: Demonstrable experience working within an ABB panelboard factory environment or for a الشركة that predominantly manufactures LV panelboards based on ABB designs, components (e.g., Emax 2, Tmax XT, System pro E power), and adheres to ABB quality systems/standards.
- Technical Skills:
- In-depth knowledge of LV panelboard components, construction methods, wiring standards, and assembly best practices (especially those aligned with ABB).
- Proficiency in reading and interpreting electrical schematics, single-line diagrams, general arrangement drawings, wiring diagrams, and technical specifications (familiarity with ABB documentation is a key advantage).
- Thorough understanding and practical application of IEC standards (particularly IEC 61439 for LV Switchgear Assemblies) and relevant SASO standards.
- Hands-on experience with standard electrical testing procedures and equipment used in panelboard QC.
- Strong knowledge of quality control methodologies (e.g., statistical process control, root cause analysis, CAPA) and tools.
- Familiarity with ISO 9001 Quality Management Systems.
- Ability to identify and accurately document non-conformances and deviations.
- Soft Skills:
- Exceptional attention to detail and meticulous approach to work.
- Strong analytical and problem-solving skills.
- Excellent communication skills, both written and verbal.
- Ability to work effectively independently and as part of a multidisciplinary team.
- High level of integrity and commitment to quality.
- Languages: Fluency in English (written and spoken) is mandatory. Arabic language skills are highly beneficial.
معلومات الوظيفة:
- الشركة: FJ Group
- المنصب: Quality Control QC Engineer - LV Panel
- مكان العمل: Riyadh
- الدولة: SA
كيفية تقديم الطلب:
بعد قراءة وفهم المعايير ومتطلبات الحد الأدنى من المؤهلات الموضحة في معلومات الوظيفة Quality Control QC Engineer - LV Panel at the office Riyadh أعلاه، أكمل فوراً ملفات طلب الوظيفة مثل خطاب التقديم، السيرة الذاتية، نسخة من الشهادة الجامعية، كشف الدرجات، والملاحق الأخرى كما هو موضح أعلاه. أرسلها عبر رابط الصفحة التالية أدناه.
الصفحة التالية »