الرئيسية » IoT Hardware Validation & Customization Engineer

IoT Hardware Validation & Customization Engineer at Perfect Vision

المنصب IoT Hardware Validation & Customization Engineer
نُشر في 24 Jun 2026
انتهت الصلاحية 24 Jul 2026
الشركة Perfect Vision
الموقع Dammam | SA
نوع الوظيفة Full Time

الوصف الوظيفي:

أحدث معلومات الوظائف من Perfect Vision لمنصب IoT Hardware Validation & Customization Engineer. If the IoT Hardware Validation & Customization Engineer الشاغرة في Dammam تتوافق مع مؤهلاتك، يرجى تقديم أحدث طلب أو سيرة ذاتية مباشرة من خلال بوابة وظائف Jobkos المحدثة.

يرجى ملاحظة أن التقديم على وظيفة قد لا يكون سهلاً دائماً، حيث يجب على المرشحين الجدد استيفاء مؤهلات ومتطلبات معينة تحددها الشركة. نأمل أن تكون الفرصة المهنية في Perfect Vision لمنصب IoT Hardware Validation & Customization Engineer أدناه تتوافق مع مؤهلاتك.

We are looking for a hands-on Hardware Evaluation & Customization Engineer to lead our technical relationship with manufacturing partners. You will audit supplier designs, run lab and field validation on samples, drive customizations on firmware and hardware, and build the in-house knowledge base that currently sits with our suppliers. Over time, you will identify products where local assembly or finishing in Dammam makes financial sense.

Key Responsibilities
  • Supplier evaluation: Read and critique supplier schematics, BOMs, and datasheets; identify cost-cutting, weak component choices, undersized regulators, fake-branded ICs, poor antenna design.
  • Sample validation: Run lab tests on supplier samples - EMC pre-checks, thermal, IP rating verification, RF/antenna performance, battery life claims, vibration.
  • Customization: Request and validate hardware customizations (housing, connectors, antenna placement, sensor additions, branding) from suppliers and verify delivery.
  • Firmware customization: Modify, reflash, harden, and debug firmware on supplier modules (ESP32, STM32, MTK, Quectel, etc.) - not from scratch, but enough to own the device behavior.
  • Supplier scorecard: Maintain a quality / lead-time / responsiveness / IP-protection scorecard across all current and candidate suppliers.
  • Field reliability: Investigate field failures in Saudi worksite conditions and feed findings back to suppliers as design change requests.
  • Certification support: Coordinate SASO, CE, and FCC submissions; ensure supplier documentation supports certification.
  • Localization roadmap: Identify 1-2 products where in-house assembly or final customization in Dammam is financially viable; lead the technical transition.
  • Cross-team support: Provide technical support to production, QC, and field installation teams.
Required Qualifications
  • Bachelor's or Master's degree in Electronics, Electrical, or Mechatronics Engineering.
  • 3-6 years in IoT/embedded hardware, ideally including direct work with Chinese ODM/OEM suppliers.
  • Strong ability to read and audit schematics and BOMs (Altium / KiCad / Eagle) - full from-scratch design is not required.
  • Firmware experience in C/C++ for ESP32, STM32, or similar - sufficient to customize and harden supplier firmware.
  • Hands on with cellular (4G/LTE), GPS, BLE, Wi Fi, or LoRa modules.
  • Comfortable with lab tools (oscilloscopes, logic analyzers, spectrum analyzer, environmental chambers).
  • Experience with version control (Git) and Agile workflows.
  • Strong written and verbal communication for supplier negotiation.
Preferred Qualifications
  • Prior experience managing Chinese ODM relationships and NDAs/IP agreements.
  • Familiarity with edge AI hardware (NVIDIA Jetson, Rockchip) and camera modules.
  • Exposure to fleet trackers, ADAS, DMS, or industrial safety devices.
  • Experience preparing products for SASO, CE, or FCC certification.
  • Mandarin language ability is a strong plus (not required).
Inclusion & Diversity

At Perfect Vision, we believe in equal opportunity and are committed to creating a diverse and inclusive workplace. We warmly welcome and encourage applications from individuals with special needs (motor disabilities), as we provide fully equipped facilities and a friendly workspace designed to ensure they can perform their duties with the highest levels of comfort and professionalism.

معلومات الوظيفة:

  • الشركة: Perfect Vision
  • المنصب: IoT Hardware Validation & Customization Engineer
  • مكان العمل: Dammam
  • الدولة: SA

كيفية تقديم الطلب:

بعد قراءة وفهم المعايير ومتطلبات الحد الأدنى من المؤهلات الموضحة في معلومات الوظيفة IoT Hardware Validation & Customization Engineer at the office Dammam أعلاه، أكمل فوراً ملفات طلب الوظيفة مثل خطاب التقديم، السيرة الذاتية، نسخة من الشهادة الجامعية، كشف الدرجات، والملاحق الأخرى كما هو موضح أعلاه. أرسلها عبر رابط الصفحة التالية أدناه.

الصفحة التالية »

وظائف شاغرة مماثلة

  QC INSPECTOR at Napco National
نُشر في: 1 hour ago

الوصف: Job Description Responsibilities Performing the online inspectionCollecting the retain samplesPerforming the required tests for the job orderPerforming the QC part of the job order start-upCollecting...

الشركة: Napco National | الموقع: Dammam
  GIS I&C Team Lead at Hitachi Energy
نُشر في: 1 day ago

الوصف: Job Opportunity You as a GIS Installation and commissioning Team Lead will be part of Hitachi Energy business based in Dammam, المملكة العربية السعودية. You will be focusing on providing technical advice to custo...

الشركة: Hitachi Energy | الموقع: Dammam
  مجمع البحث عن وظائف 2026
من نحن
سياسة الخصوصية
إخلاء المسؤولية
الشروط والأحكام
اتصل بنا
إرسال ملف XML

© Jobkos

  من خلال زيارة موقع Jobkos أو عرض أو الوصول إلى أو استخدام أي من الخدمات أو المعلومات التي تم إنشاؤها أو جمعها أو تجميعها أو إرسالها إلى Jobkos، فإنك توافق على الالتزام بشروط وأحكام الخدمة التالية.
تم الإنشاء بواسطة Jobkos | | | |